Run Off River (ROR) Pump | Mechanical Engineering (Hydropower) Project | Kathmandu University

We are elaborating about our project "ROR Pump" These blades of the turbine are places with inlet angle 30 degreeand outlet angle 90 degree

The water strikes hereand goes to this direction, thus makes the turbine to rotate in this direction Here we have used two bearing casing The shaft is of 25 mm diameter So, 25 mm bearing is used

We have 24 number of blades in our turbine The blades are slices of PVC pipeswith 9 inch diameter And we have two gears of 3:1 ratio The smaller has 24 and larger has 80 teeth

These are two locally available pumps The turbine is rotating the primary gearwhich is linked with secondary gearso secondary gear is also rotatingdue to which pump displaces the water We can see

the movement of piston inside the pumpwhen the piston is moving to and fro between TDC and BDC This is our first year (second semester) project of Mechanical Engineering (specialized in Hydro-power) ROR Pump ROR Pump Run Off River Pump Thank You For Watching!!

Advertise Here

Recommended

FREE ENERGY!

Alternative Energy

Subscribe

Recommended

Advertise Here

Alternative Energy

Alternative Energy

HIGHLY RATED: